Aeotec

Aeotec Multi-Sensor 6

  • Free Shipping and returns
  • ZHome Works guarantee
  • Free Expert consultation Bei tink ist 1+1<2. Wir bieten unseren Kunden beim Kauf mehrerer Artikel exklusive Mengen- und Paketrabatte.

Most important functions


Can be controlled via an app for android devices.
The product is particularly easy to put into operation.
Can be controlled via an app for Apple iOS devices.
Can communicate with other devices that support the Z-wave protocol.
Compatible with Amazon Alexa.
Compatible with Google Assistant.
Multi-Sensor is composed of Motion , Temperature , Light , Humidity , Vibration and UV sensors

The advantages of the sensor at a glance:

  • Alert against Tamper
  • Instant installation
  • 6 in 1
  • Battery or USB power supply powered

Expert Evaluation


8.5
Tested by Zhome expert

 

Product Information

Aeotec MultiSensor 6 was developed to detect ambient values and movement and to transmit them with Z-Wave Plus. It is powered by Aeotec’s Gen5 technology.


Product Information

Aeotec MultiSensor 6 was developed to detect ambient values and movement and to transmit them with Z-Wave Plus. It is powered by Aeotec’s Gen5 technology.

Videos About the Product

App Download

Technical Details

Power supply USB DC 5V
battery power (2×CR123A batteries, 3V, 1500mAh)
Product Dimensions 47 x 47 x 38 mm
Voltage input USB power
Min Voltage = 4.5VDC
Max Voltage = 5.5VDC
Battery Power
Min Voltage = 2.6VDC
Max voltage = 3.2VDC
Radio frequency 868.4 - 869.8 MHz
Repeater USB power - Yes
Battery Power - No
Battery life ~1.5 years
Maximum current consumption during a report 200mA
Operating humidity 8% to 80%
Operating temperature 0°C to 40°C
Operating distance More than 50 meters indoors
Up to 150 meters outdoors
Measured temperature range -10°C to 50°C
Temperature Accuracy ±1°C
Measured humidity range 20%RH to 90%RH
Humidity Accuracy ±3%RH at 25°C
Lighting 0 LUX to 30000 LUX
UV Range 0 to 10 UV index
Max motion sensitivity 5 metres

Installation

MultiSensor 6's motion sensor uses light and heat readings to determine motion; sudden light and heating changes can impact the sensor's quality of motion readings. As such, your sensor should not be installed in areas of artificial temperature change. Thus, when selecting a location, avoid placing it beside or near air conditioners, humidifiers, and heaters, and avoid positioning it directly opposite a window or direct sunlight.
If installing MultiSensor 6 on a ceiling it can take measurements within a 3 x 3 x 6 metres.
If installing MultiSensor 6 in a corner where the wall meets the ceiling it can take measurements within a 2.5 x 3.5 x 5 metres.
For optimal performance, your MultiSensor 6 should NOT be mounted directly on or near metal framing or other large metallic objects. Large metal objects may weaken the Z-Wave wireless signal MultiSensor 6 depends on for communication due to the wireless reflective properties of any metal.

FAQs

 

 

 

 

 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

With ZHome You Always Get