Fibaro

Fibaro Motion Sensor [ Apple HomeKit ]

  • Free Shipping and returns
  • ZHome Works guarantee
  • Free Expert consultation Bei tink ist 1+1<2. Wir bieten unseren Kunden beim Kauf mehrerer Artikel exklusive Mengen- und Paketrabatte.

Most important functions

Compatible with Apple Homekit.
Easy integration & Simple installation
Bluetooth® low energy technology for wireless communication
iOS and tvOS compatibility
IFTTT stands for "If This Then That" and is a service that enables simple instructions to be linked. Example: When I go into my house in the evening, all the lights should go on.
Compatible with Amazon Alexa.

FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using Bluetooth® low energy wireless technology. Along with detecting motion, the accessory measures temperature and light intensity. Built-in accelerometer detects tampering with the accessory. The eye-shaped LED indicator signals motion, temperature level, tampering and can be used to identify the accessory. FIBARO Motion Sensor is battery powered and designed to be installed quickly and easily on any surface.

The advantages of Fibaro Motion Sensor [ Apple HomeKit ] at a glance:

  • May be installed anywhere - wall or any surface
  • Up to 2 years on a single battery
  • Night Light Functionality
  • Detects motion using a passive IR sensor
  • Uses color to display temperature range
  • Detects tampering using accelerometer
  • Indicates state using multicolor LED (LED indicator may be switched off)

Expert Evaluation


9.5
Tested by Zhome expert

 

Product Information

Functionalities :

  • Motion detection : The Motion Sensor detects movement using PIR sensor and reports it to your iOS device. Blink of LED indicates detected motion. Color of blink is dependent on current ambient temperature (smooth transition through blue, green and red). Brightness of blink is adjusted by measured light intensity.
  • Tamper detection : The Motion Sensor detects tampering when accessory is moved and reports it to your iOS device. Tampering is indicated with an alternate blinking in red, blue and white.
  • Temperature measuring : The Motion Sensor measures ambient temperature every 5 minutes. If the measured temperature differs from previously reported by at least 2°C (3.6°F), accessory reports it to your iOS device. NOTE: The accessory measures temperature in the place of installation. Remember that temperature near the ceiling may differ from that on eye-level or the floor.
  • Battery level measuring : The Motion Sensor measures battery level every 24 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.
  • Light intensity measuring : The Motion Sensor measures light intensity. If the measured light intensity differs from previously reported by at least 200 lux, accessory reports it to your iOS device. NOTE: The accessory measures light intensity in the place of installation, not where the sensor is pointed.
  • PIR sensor malfunction detection (Fault Code 1) : The Motion Sensor detects malfunction of PIR sensor (responsible for motion detection) and reports it to your iOS device. Getting Fault Code 1 warning means that the accessory is damaged and should be returned to the distributor for the warranty (if still valid).
  • iOS and tvOS compatibility : Controlling this HomeKit-enabled accessory requires an iPhone, iPad, or iPod touch with iOS 9.3 or later. Controlling this HomeKit-enabled accessory away from home requires a third-generation Apple TV with Apple TV software 7.2.1 or later or a fourth generation Apple TV with tvOS 9.2 or later and an iPhone, iPad, or iPod touch with iOS 9.3 or later.


Product Information

Functionalities :

  • Motion detection : The Motion Sensor detects movement using PIR sensor and reports it to your iOS device. Blink of LED indicates detected motion. Color of blink is dependent on current ambient temperature (smooth transition through blue, green and red). Brightness of blink is adjusted by measured light intensity.
  • Tamper detection : The Motion Sensor detects tampering when accessory is moved and reports it to your iOS device. Tampering is indicated with an alternate blinking in red, blue and white.
  • Temperature measuring : The Motion Sensor measures ambient temperature every 5 minutes. If the measured temperature differs from previously reported by at least 2°C (3.6°F), accessory reports it to your iOS device. NOTE: The accessory measures temperature in the place of installation. Remember that temperature near the ceiling may differ from that on eye-level or the floor.
  • Battery level measuring : The Motion Sensor measures battery level every 24 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.
  • Light intensity measuring : The Motion Sensor measures light intensity. If the measured light intensity differs from previously reported by at least 200 lux, accessory reports it to your iOS device. NOTE: The accessory measures light intensity in the place of installation, not where the sensor is pointed.
  • PIR sensor malfunction detection (Fault Code 1) : The Motion Sensor detects malfunction of PIR sensor (responsible for motion detection) and reports it to your iOS device. Getting Fault Code 1 warning means that the accessory is damaged and should be returned to the distributor for the warranty (if still valid).
  • iOS and tvOS compatibility : Controlling this HomeKit-enabled accessory requires an iPhone, iPad, or iPod touch with iOS 9.3 or later. Controlling this HomeKit-enabled accessory away from home requires a third-generation Apple TV with Apple TV software 7.2.1 or later or a fourth generation Apple TV with tvOS 9.2 or later and an iPhone, iPad, or iPod touch with iOS 9.3 or later.

Videos About the Product

Apps Download

Download Home

Download FIBARO for HomeKit Devices

Technical Details

Power supply 3.0V DC battery
Battery type CR123A/CR17345
EU directives compliance RED 2014/53/EU
RoHS 2011/65/EU
Radio protocol Bluetooth® low energy
Radio frequency 2.4 GHz
Radio transmit power up to 6 dBm (EIRP)
Range up to 50m (free range)
(164 feet)
Recommended installation height 2.4 meters (7.87 feet)
Operating temperature 0-40°C (32-104°F)
Temperature measuring range 0-40°C (32-104°F)
Temperature measuring accuracy ±0.5°C (±0.9°F)
Light intensity measuring range 0-32000 lux
Dimensions (diameter) 46 mm (1.8 inch)

Warning: Using batteries other than specified may result in explosion. Dispose of properly, observing environmental protection rules.

Installation

Installation location and working conditions:

  • The Motion Sensor should be installed in a corner of the room or perpendicularly to the doors.
  • Moving objects such as trees blowing in the wind, cars passing by, household fans and moving masses of air and heat within detection area of the sensor can cause false motion detection.

FAQs

There are few actions to be done:
a) Make sure your accessory is powered on.
b) Make sure your accessory is close to your mobile device.
c) Make sure you use a correct setup code.
d) If you own more than one identical accessory, use the ‘Identify’ function.
e) You may need to reset the accessory if it’s not connecting, or if it’s already connected to another home.

There are few actions to be done:
a) Make sure your accessory is powered on.
b) Make sure your accessory is close to your mobile device.
c) If you just connected your accessory, wait a moment, then try again.
d) You may need to reset the accessory if it’s not connecting, or if it’s already connected to another home.

The accessory needs to be removed manually using the application interface.

It’s necessary to perform the reset procedure of the accessory according to its manual.

There are two possible causes of such situation:
a) The accessory is out of range. Come closer with your mobile device and try again.
b) The battery is empty and needs replacing.

Unfortunately, not. Motion Sensor may be only battery powered (CR123A 3.0V DC).

Moving objects such as trees blowing in the wind, cars passing by, household fans and moving masses of air and heat within detection area of the sensor can cause false motion detection.

Unfortunately, not – indoor use only.

There are two possible causes of such situation:
a) The sensor’s cover is not closed. Make sure the dots on the casing align.
b) Someone accidentally moved the sensor.

Take off the cover, remove the empty battery, insert a new one, and close the cover.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

With ZHome You Always Get