FIBARO Walli Roller Shutter is a smart wall switch designed to control garage doors, electric powered gate, a number of blinds, curtains and automation scenes physically or wirelessly through your mobile via Z-Wave network.
The advantages of Fibaro Walli Roller Shutter at a glance:
The Roller Shutter by Fibaro is the only controller I know that has a real switch mode.The Roller Shutter can also distinguish between manual operation and operation via app, which is especially important when positioning the lamellas. In addition, Fibaro also supports the individual adjustment of the lamellar position, since there are not so many others that can. So you can drive the blind to 70% (2/3 closed) and the slats to 50% (horizontal). Walli also has a unique shape and design that is better than normal switches.
Control all roller shutters at once from one switch. Unique combination of ease and versatility that allows to link one roller shutter controller with all roller blinds throughout the entire apartment
Features :
Power Supply | 100-240V AC, 50/60 Hz |
Compatible load types | Single-phase AC motors Resistive loads |
Required limit switches | electronic or mechanic |
Recommended external overcurrent protection | 16A type B circuit breaker |
Recommended wires | cross-section area between 1.5-4.0mm2 stripped 11.5-13mm of insulation |
Rated load current | 4A for motors with compensated power factor (inductive loads) 13A for resistive loads |
Operating temperature | 0-35°C (32-95°F) |
Ambient humidity | 10–95% RH without condensation |
For installation in boxes | Ø = 60mm, depth ≥ 40mm |
Radio protocol | Z-Wave (500 series chip) |
Max. transmitting power | +6dBm |
Radio frequency | 868.0-868.6 MHz EU |
Range | up to 50m outdoors up to 40m indoors (depending on terrain and building structure) |
EU directives compliance | RED 2014/53/EU RoHS 2011/65/EU |
Dimensions (Height x Width x Depth) | 86 x 86 x 51 mm |
- This product is intended for indoor use only in dry locations. Do not use in damp or wet locations, near a bathtub, sink, shower, swimming pool, or anywhere else where water or moisture are present.
- It is not recommended to operate all of the roller blinds simultaneously. For safety reasons, at least one roller blind should be controlled independently, providing safe escape route in case of emergency.
|
|
Control all roller shutters at once from one switch. Unique combination of ease and versatility that allows to link one roller shutter controller with all roller blinds throughout the entire apartment
Features :
Power Supply | 100-240V AC, 50/60 Hz |
Compatible load types | Single-phase AC motors Resistive loads |
Required limit switches | electronic or mechanic |
Recommended external overcurrent protection | 16A type B circuit breaker |
Recommended wires | cross-section area between 1.5-4.0mm2 stripped 11.5-13mm of insulation |
Rated load current | 4A for motors with compensated power factor (inductive loads) 13A for resistive loads |
Operating temperature | 0-35°C (32-95°F) |
Ambient humidity | 10–95% RH without condensation |
For installation in boxes | Ø = 60mm, depth ≥ 40mm |
Radio protocol | Z-Wave (500 series chip) |
Max. transmitting power | +6dBm |
Radio frequency | 868.0-868.6 MHz EU |
Range | up to 50m outdoors up to 40m indoors (depending on terrain and building structure) |
EU directives compliance | RED 2014/53/EU RoHS 2011/65/EU |
Dimensions (Height x Width x Depth) | 86 x 86 x 51 mm |
- This product is intended for indoor use only in dry locations. Do not use in damp or wet locations, near a bathtub, sink, shower, swimming pool, or anywhere else where water or moisture are present.
- It is not recommended to operate all of the roller blinds simultaneously. For safety reasons, at least one roller blind should be controlled independently, providing safe escape route in case of emergency.
|
|
Our Smart Home Experts will individually advise you on finding your best smart home solution.
In addition to products Warranty We offer ZHome Functional Guarantee with all our products
At ZHome, customer Experience has top priority. We want to make sure that your Smart products are all properly installed and working
If you have a problem in setup or installing your device, our ZHome service team will be happy to help you via chat, e-mail or Video call.
If our experts were not able to help you to your full satisfaction, ZHome will organize a free on-site installation service *.
In any case, you can return the products free of charge within 14 days of delivery*.
*Installation service depends on the region availablity
* Return Policy applies
Buy comfortably Online with Free shipping costs and get Free return period for 14 days..