Product Information

Heatit Z-Water is a DIN-rail regulator for controlling waterbased heating systems. The module clips right onto a DIN-rail to add a variety of functions to your wireless Z-Wave network. Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog inputs.
The module is power supplied from a 230VAC mains connection and is able to deliver an output supply of 24VDC or 230VAC. Heatit Z-Water relay outputs may be freely controlled from the Z-Wave network, and may be used for several purposes, e.g. on/off control of lights, controlling valve actuators in an underfloor heating system, or controlling other home automation systems.
Should not be placed in steel cabinets as this will reduce the range

Features

• Regulator for waterbased heating systems
• Relay outputs can control actuators in a waterbased floor heating system
• May be used to control both 24V actuators and 230VAC actuators
• May be used with a Heatit Z-Temp2 or Heatit Z-TRM3 thermostat in each zone
• DIN-rail mounting
• Works as a Z-Wave repeater to improve the Z-Wave network range
• Firmware update (OTA)
• Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class

Videos About the Product

App Download

Technical Details

• Protocol: Z-Wave
• Rated voltage: 100VAC - 240VAC 50/60Hz
• Power consumption : 0.6W standby
• Ambient temperature: 5°C to 40°C
• Humidity: Max. 90% RH
• Fuse: 3.15A Quick-Acting
• 24V DC output: Maximum 1.17A, 28W
• Max. switching current: 5A
• Max load per relay: 150w
• Max voltage: 250VAC 30VDC
• Inputs Max.: input voltage: 10VDC
  Input impedance: 10 KΩ
  Loop output voltage: 5VDC
• IP Code: IP 21
• Size: 160 x 86 x 58mm

Installation

FAQs