Popp

Popp Gas Sensor

  • Free Shipping and returns
  • ZHome Works guarantee
  • Free Expert consultation Bei tink ist 1+1<2. Wir bieten unseren Kunden beim Kauf mehrerer Artikel exklusive Mengen- und Paketrabatte.

Most important functions


Can be controlled via an app for android devices.
The product is particularly easy to put into operation.
Can be controlled via an app for Apple iOS devices.
Can communicate with other devices that support the Z-wave protocol.
The electrochemical carbon monoxide sensor by Popp is used for air quality monitoring and warns reliable if CO content in a room exceeds a defined limit.

The advantages of Gas Sensor at a glance:

  • Integrated 10 years lithium battery
  • Loud alarm sound with 85dB 3m

Expert Evaluation


8.5
Tested by Zhome expert

 

Product Information

Z-Wave Popp CO Detector combines a certified carbon monoxide detector with a plug-in Z-Wave module to form a wirelessly reporting carbon monoxide sensor. The high-end carbon monoxide detector offers a test button conveniently accessible – e.g. with a broom stick – when mounted on the ceiling. Three colored LEDs on the device indicate Alarm, Error and Battery Level. The Alarm conditions as well as the actual CO level – measured in ppm – are re-ported wirelessly using Z-Wave. Additionally, a group of actuators can be con-trolled using the BASIC command class in case the CO alarm triggers. Two configuration parameters define what command to be sent in this case. The electro-chemical CO sensor controls air quality and warns reliable when CO exceeds a defined limit. In case of an alarm the devices causes a loud sound (85dB/3m) and reports the alarm as well as the current measured value to the Z-Wave control center. A Z-Wave alarm will be sent out when one of the following conditions were met: CO level above 43 ppm for a duration of 60 minutes, CO level above 80 ppm for a duration of 10 minutes, CO level above 150 ppm for a duration of 2 minutes.

Features
  • Integrated 10 years lithium battery
  • Loud alarm sound with 85dB 3m
  • Separate LED signal lights for power supply, alarm mode and error reports
  • Z-Wave Plus certified


Product Information

Z-Wave Popp CO Detector combines a certified carbon monoxide detector with a plug-in Z-Wave module to form a wirelessly reporting carbon monoxide sensor. The high-end carbon monoxide detector offers a test button conveniently accessible – e.g. with a broom stick – when mounted on the ceiling. Three colored LEDs on the device indicate Alarm, Error and Battery Level. The Alarm conditions as well as the actual CO level – measured in ppm – are re-ported wirelessly using Z-Wave. Additionally, a group of actuators can be con-trolled using the BASIC command class in case the CO alarm triggers. Two configuration parameters define what command to be sent in this case. The electro-chemical CO sensor controls air quality and warns reliable when CO exceeds a defined limit. In case of an alarm the devices causes a loud sound (85dB/3m) and reports the alarm as well as the current measured value to the Z-Wave control center. A Z-Wave alarm will be sent out when one of the following conditions were met: CO level above 43 ppm for a duration of 60 minutes, CO level above 80 ppm for a duration of 10 minutes, CO level above 150 ppm for a duration of 2 minutes.

Features
  • Integrated 10 years lithium battery
  • Loud alarm sound with 85dB 3m
  • Separate LED signal lights for power supply, alarm mode and error reports
  • Z-Wave Plus certified

Videos About the Product

App Download

Technical Details

  • Wireless: Z-Wave Plus (868.42MHz)
  • Power Supply: Irreplaceable lithium battery
  • Sensors: Carbon monoxide
  • Temperature: 0 ~ 55° C
  • Humidity: 85% RH max
  • Range: up to 50m (outdoors) and 30m (indoors)
  • Dimensions: 104 x 119 x 43 mm (LWH)

Installation

FAQs

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

With ZHome You Always Get