Your Cart is Empty
 |
The advantages of Smart Meter 3 Phase at a glance:
It looks good and both construction and design give confidence. Installation on the electrical panel has been quite easy. With it, I control the total consumption of the house and I have been able to adjust the electric bill better. I also use that data to stop closing the blinds in case of passing the power of my electric bill.
Qubino 3-Phase Smart Meter is used for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications. The device measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals. It is designed to be mounted on DIN rail. The Qubino 3-Phase Smart Meter device can operate across a wide temperature range, from a chilly -25˚C to a scorching 55˚C (-13F˚to a scorching 131˚F). Every device also acts as a repeater in order to improve the range and stability of the Z-Wave network.
Qubino 3-Phase Smart Meter is used for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications. The device measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals. It is designed to be mounted on DIN rail. The Qubino 3-Phase Smart Meter device can operate across a wide temperature range, from a chilly -25˚C to a scorching 55˚C (-13F˚to a scorching 131˚F). Every device also acts as a repeater in order to improve the range and stability of the Z-Wave network.
| Main terminals (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO) | |
| Contacts capacity: | 2.5 ... 16 (25) mm2 |
| Connection screws: | M5 |
| Max torque: | 3.5 Nm (PZ2) |
| Optional terminals (1,2,4,5) | |
| Contact capacity: | 1 ... 2.5 mm2 |
| Screws: | M3 |
| Max torque: | 1.2 Nm |
| Measuring input: | |
| Type (connection): | three phase (4u) |
| Basic current (Ib): | 5 A |
| Maximum current (Imax): | 65 A |
| Minimum current (Imin): | 0.25 A |
| Starting current: | 20 mA |
| Nominal voltage (Un): | 3x230 V/400V |
| Power consumption at Un: | < 8 VA |
| Nominal frequency (fn): | 50 and 60 Hz |
| Accuracy: | |
| Active energy and power: | |
| Standard EN 62053-21: | class 1 |
| Standard EN 50470-3: | class B |
| Reactive energy: | |
| Standard EN 62053-23: | class 2 |
| LED: | |
| Colour: | red |
| Pulse rate: | 1000 imp/kWh |
| LED on: | no load indication |
| Optical communication: | |
| Type: | IR - used to control BICOM432-40-IR |
| Input (16): | |
| Rated voltage: | 230 V (± 20%) |
| Input resistance: | 450 kOhm |
| Safety: | |
| LCD: | |
| Indoor Meter: | yes |
| Degree of pollution: | 2 |
| Protection class: | II |
| AC voltage test: | 4 kV |
| Installation Category: | 300 Vrms cat. III |
| AC voltage test: | 4 kV |
| Installation Category: | 300 VRMS Cat. III |
| Standard: | EN 50470 |
| Ambient conditions and EMC: | |
| According standards for indoor active energy Meters. | |
| Temperature and climatic condition according to EN 62052 11 | |
| Ambient conditions and Safety: | |
| According standards for indoor active energy Meters. | |
| Temperature and climatic condition according to EN 62052 11 | |
| Dust/water protection: | IP50 |
| Operating temperature: | -25 ... 55°C |
| Storage temperature: | -40 ... 70°C |
| Enclosure material: | self-extinguish complying UL94 V |
| Indoor Meter: | yes |
| Degree of pollution: | 2 |
| AC voltage test: | 4 kV |
| Standard: | EN 50470 |
| Distance: | up to 30 m indoors (depending on building materials) |
| Weight (with packaging): | 220g (240g) |
| Frequency range: | 868.4 MHz*, Z-Wave |
| Installation: | DIN rail 35mm |
| Dimensions (W x H x D): | 53,6 x 84 x 65mm |
| Package dimensions (W x H x D): | 58 x 84 x 95mm |
| Colour | RAL 7035 |
Needs Neutral wire
Our Smart Home Experts will individually advise you on finding your best smart home solution.
In addition to products Warranty We offer ZHome Functional Guarantee with all our products
At ZHome, customer Experience has top priority. We want to make sure that your Smart products are all properly installed and working
If you have a problem in setup or installing your device, our ZHome service team will be happy to help you via chat, e-mail or Video call.
If our experts were not able to help you to your full satisfaction, ZHome will organize a free on-site installation service *.
In any case, you can return the products free of charge within 14 days of delivery*.
*Installation service depends on the region availablity
* Return Policy applies
Buy comfortably Online with Free shipping costs and get Free return period for 14 days..
